Bare Metal Sealer

Description

Bare Metal Seam Sealer is a versatile, two component sealer for sealing interior or exterior seams, joints and voids. It stays flexible and is paintable in 30 minutes.

Features
- Easy tooling, non-sag formula is ideal for use on many seams
- Beige color matches many OEM sealers
- Remains flexible without shrinking or cracking
- Excellent adhesion to multiple surfaces
- Increases production - paintable in 30 minutes
- Isocyanate free

Applications
Bare Metal Seam Sealer may be applied directly to bare sanded metal or primed surfaces. However, if the area will be subjected to any flexing or twisting, including certain vehicle manufacturers roof skins, prime the area first with quality urethane or epoxy primer before applying any Bare Metal Seam Sealer. When in doubt, prime with a quality urethane or epoxy primer. Allow primer to fully cure and sand with 400 grit sand paper or a red scuff pad before applying Bare Metal Seam Sealer.

Areas of use
- Rear Body Panels
- Tail Light Pockets
- Under Hood Area
- Aprons
- Strut Towers
- Core Supports
- Floor Pan Areas

This product can expose you to chemicals including Quartz, Titanium dioxide which is known to the State of California to cause cancer, and Ethylene glycol, Methanol which are known to the State to cause birth defects or other reproductive harm.

For more information go to: https://www.p65warnings.ca.gov/