Bearing Retainer - High Strength

 

Description

0.88 oz. DOS

Physical Properties (in liquid state)

Chemical description: Dimethylacrylate
Color: Green
Viscosity/77F Brookfield(RTV): 100 - 150 mPas (spindle rpm: 1/20)
Density: 1.07 g/cm3
Maximum thread diameter: M12
Maximum gap filling capacity: 0.15 mm
Flash point: > 194?F
Shelf life: 1 year at room temperature

 

 

Physical Properties (in cured state)

Hand-tight after: 5 - 10 minutes
Usable after: 30 - 40 minutes
Final strength after: 3 - 6 hours
Initial breakaway torque: N/A
Continuing torque: N/A
Pressure shearing strength (DIN 54452): 18 - 26 N/mm2
Operating termperature range: -67?F to +302?F

 

For high-strength ­assembly of bushes, ­sleeves, geared wheels, bolts, shaft and hub connections and bearings exposed to high loads.

Features
Dependable curing at low temperatures around 32°F
- A dependable aid in winter
Can be applied to slightly oily surfaces
- No need for time-consuming degreasing of bearings
Max. gap filling of 0.15 mm
- Even large deviations can be corrected economically
Prevents frictional corrosion
- Prevents seizing of bearings, ­providing easy disassembly

This product can expose you to Cumene which is known to the State of California to cause cancer , and Ethylene Glycol which is known to the State to cause birth defects or other reproductive harm.

For more information go to: https://www.p65warnings.ca.gov/