Threadlocker - High Strength

 

Description

0.35 oz. DOS

Physical Properties (in liquid state)

Chemical description: Dimethylacrylate
Color: Red
Viscosity/77?F Brookfield(RTV): 400 - 600 mPas (spindle rpm: 2/20
Density: 1.11 g/cm3
Maximum thread diameter: M20
Maximum gap filling capacity: 0.15 mm
Flash point: > 212?F
Shelf life: 1 year at room temperature

 

 

Physical Properties (in cured state)

Hand-tight after: 10 - 20 minutes
Usable after: 1 - 3 hours
Final strength after: 5 - 10 hours
Initial breakaway torque: >30 Nm (M10)
Continuing torque: >45 Nm (M10)
Pressure shearing strength (DIN 54452): 12 - 15 N/mm2
Operating termperature range: -67?F to +302?F

 

Screw retaining and ­sealing compound – ­hardly removable. For securing, attaching and sealing of screws, studs bolts, nuts, threaded ­inserts and plugs, which are not required to be removed under normal circumstances.

Features
Particularly well-suited for heavy duty screw connections
- No additional securing devices required
Removable only after heating to 572°F!
- Under normal conditions only removable with special tools and/or heating
Outstanding resistance to chemicals and heat
- Universal product with a wide range of applications
Prevents loosening caused by, for instance, vibrations or impact
- No safety problems, unlike, for instance, with mechanical screw retainers

This product can expose you to Cumene which is known to the State of California to cause cancer , and Ethylene Glycol which is known to the State to cause birth defects or other reproductive harm.

For more information go to: https://www.p65warnings.ca.gov/