Urethane Based Sprayable Seam Sealer

 

Description

310 ml -Grey

Technical Data

Skin formation time (DIN 50014): 25 minutes
Curing speed (DIN 50014): approximately 3 mm per 24 hours
Shore A hardness (DIN 53505): 40
Temperature resistance: -40?F to +176?F
Storage temperature: +41?F to +77?F

 

Spray sealer based on MS polymers to restore the original structure and texture when undertaking an accident repair. Contains solvents.

Features
- Paintable within 1 hour
- Isocyanate and silicone free
- Good adhesion properties on galvanized, self color & originally primed parts
- Quick drying (approx 3mm/24h at 68?F and 50% RH)
- Wet on wet paintability once product has skinned over
- Can be painted with all standard commercial paints (except alkyd resin paints)
- Once opened the cartridge remains usable for several weeks
- Use Art. # 08916284 for OEM textures

Very broad adhesion range
- Adheres to many surfaces, even without a primer coat
Great Shore A hardness
- The material is impervious to mechanical loads
High tensile strength and elongation at tear
- The seam also withstands stronger movements / elongation UV-stable
- Excellent ageing behavior, even when seams are not painted over
Suitable for painting over
- -Wet on wet- and can be painted over with any conventional painting system (except alkyd resin paints) up to five days after skin formation
- After this period, another adhesion promoter (primer coat) must be applied for improved adhesion of the paint
Isocyanate and silicone free

Suitable for
Sealing joints when replacing components in the engine compartment, boot, floor pan, suspension, etc.

This product can expose you to Di-isononyl phthalate which is known to the State of California to cause cancer.

For more information go to: https://www.p65warnings.ca.gov/