RP-30FCH / Electric/Hydraulic Oil Filter Crusher with Stand / 15-TonCapacity / 1-Phase
Article number198518242
Article number198518242
| Quantity (Pack Size: 1) | Unit Price |
|---|---|
| 1 (Min) | $2,475.000 |
| $2,475.000 |
Total:
$2,475.000
This article ships from a third-party supplier.
E/HOilFilterCrsh/WStnd/15ton/RP-30FCH - The RP-30FCH oil filter crusher applies 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. Its manual stainless steel handle is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start operation.
With 15 tons of crushing power at your disposal, most oil filters can be easily smashed down to hockey pucks in a matter of seconds. As long as the uncrushed filter fits in the crushing chamber, there’s an extremely high likelihood this oil filter crusher will be draining out that oil in no time, converting your hazardous-waste oil filters into legally recyclable metal. The RP-30FCH crushes oil filters down to 20% of their original size and removes 95% of any remaining oil from the filter. A large, rugged stand permits the use of oil storage drums up to 55 gallons.
No bells and whistles here—just the essentials. Manually operated machinery is often preferred for its simplicity and overall dependability. The two-way handle permits lowering and raising of the crushing block; releasing the handle immediately stops all operations. To further ensure user safety, a built in, spring-loaded shutoff switch is depressed when the chamber door is closed. If the door opens for any reason, the switch cuts electrical connectivity to the crusher and operations instantly cease. Plus, the RP-30FCH oil filter crusher features a see-through fiberglass window, so operators get to safely watch all crushing operations in real-time.
Specification:
BENDPAK NUMBER #5150008
For warranty information, shipping, and FAQ, please visit: BendPak info page
With 15 tons of crushing power at your disposal, most oil filters can be easily smashed down to hockey pucks in a matter of seconds. As long as the uncrushed filter fits in the crushing chamber, there’s an extremely high likelihood this oil filter crusher will be draining out that oil in no time, converting your hazardous-waste oil filters into legally recyclable metal. The RP-30FCH crushes oil filters down to 20% of their original size and removes 95% of any remaining oil from the filter. A large, rugged stand permits the use of oil storage drums up to 55 gallons.
No bells and whistles here—just the essentials. Manually operated machinery is often preferred for its simplicity and overall dependability. The two-way handle permits lowering and raising of the crushing block; releasing the handle immediately stops all operations. To further ensure user safety, a built in, spring-loaded shutoff switch is depressed when the chamber door is closed. If the door opens for any reason, the switch cuts electrical connectivity to the crusher and operations instantly cease. Plus, the RP-30FCH oil filter crusher features a see-through fiberglass window, so operators get to safely watch all crushing operations in real-time.
Specification:
- Maximum crushing pressure of 30,000 pounds
- Filters are reduced to 20% of their original size with 95% of residual oil removed
- Fulfills EPA and other mandated environmental standards
- Save on waste disposal costs and storage space
- Cycle time approximately 8 to 15 seconds depending on filter size
- No-mess design operates clean and efficiently to lessen spill hazards
- Ergonomic controls feature manual cycles
- Welded steel plate construction
- Electric-hydraulic power unit features 2-HP motor
- Spring-loaded shutoff switch stops operation when door is opened
- Transparent door for a convenient view of the crushing process
- Powered by a 2-HP electric-hydraulic pump with 2-gallon reservoir
- Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling
BENDPAK NUMBER #5150008
For warranty information, shipping, and FAQ, please visit: BendPak info page
